For stone processing factories, the stone engraving machine is a sharp tool for our production. Increasing its working speed to improve efficiency can enhance the competitiveness of the enterprise, which is particularly important for the development of the enterprise. How to provide the working speed?
First, reset the relevant parameters of the machine. The operating parameters of the CNC stone engraving machine are mainly set at manual low speed and manual high speed. These two parameters affect the operating speed of the machine in manual mode. The idling speed affects the speed of the machine during the empty run after the knife is raised. The processing speed is not difficult to understand is the operating speed of the machine during normal processing. These speeds are determined according to the material and material to be engraved.
Second, select the tool according to the software display path.
Third, the software will generate different engraving paths according to different graphics and different tools. The difference in engraving paths means that the length of engraving time is different. That is, we choose the most suitable tool according to the material to be processed, so that the stone engraving machine can generate a better path, reduce the processing time, and make the production work more efficient.
Fourth,, the setting of the lifting distance of the stone engraving machine. Practice has proved that the smaller the lifting distance of the stone engraving machine is set, the shorter the empty running time of the equipment, so we must judge this value according to the material to be processed, but we should try to set this value to the minimum. In addition, the processing of the stone engraving machine will be divided into two parts: roughing and finishing. In the first part, the overall speed of roughing and the selection of tools should be faster and better, and all the margins should be removed as much as possible to save Time improves work efficiency. Of course, the performance of the stone engraving machine is not only reflected in the hardware configuration of the machine, but also requires us to accumulate processing experience bit by bit to improve processing efficiency.
Fifth, the main point to improve the speed of the stone engraving machine is to determine a reasonable engraving speed according to the hardness of the engraving material and the performance of the stone engraving tool. Of course, the stability of the stone engraving machine itself must also be considered. Overload operation. The tool of each material will have a cutting amount, so we might as well set the cutting amount to 2/3, so that the tool life will be greatly increased, and the processing speed can be increased a lot, which can save tool costs , Can also improve processing efficiency.
Post time: Jan-18-2021