Stone CNC Router Machine blades to user guide :
1. For the acrylic cutting of stone engraving machine, single-edged spiral milling cutter is recommended. It is characterized by smokeless and odorless processing, fast speed, high efficiency, non-sticky, truly environmentally friendly, and its special manufacturing process guarantees the processing of acrylic No burst, very fine knife pattern (or even no knife pattern), smooth and smooth surface. The machined surface needs to achieve a frosted effect. It is recommended to use a double-edged three-edged spiral milling cutter.
2. For stone engraving machine density board cutting processing (for advertising mold opening), double-edged large chip removal spiral milling cutter is recommended. It has two high-capacity chip flutes and a double-edged design, which has a good chip removal function. , It also achieves a good tool balance. When processing medium and high density boards, it does not turn black, does not smoke, and has the characteristics of long service life.
3. For cutting aluminum plate of stone engraving machine, it is recommended to use single-blade special aluminum milling cutter. No sticking to the knife during processing, fast speed and high efficiency.
4. For cutting without burrs on the top and bottom of the stone engraving machine, it is recommended to use single-edged, double-edged up and down cutters.
5. For metal engraving of stone engraving machine, single-edged, double-edged straight-groove flat-bottomed sharp knife is recommended.
6. The 3D carving knife of the stone carving machine has high concentricity and sharp cutting edge, which can be used for precision 3D carving processing.
7. It is recommended to use prismatic cutters for high-density boards and solid wood for stone engraving machines.
8. For multi-layer board and splint processing of stone engraving machine, double-edged straight groove milling cutter is recommended.
9. For precision small relief processing with stone engraving machine, round bottom engraving knife is recommended.
10. For the processing of large deep reliefs of cork, MDF, virgin wood, PVC, and acrylic for stone engraving machine, single-edged spiral ball end milling cutter is recommended.
11. The use effect of the lower cutter of the stone engraving machine, the upper surface of the processed product is free of burrs, and there is no warping during processing.
12. Tungsten steel milling cutter is recommended for metal mold processing milling cutter of stone engraving machine, the surface is plated with purple black and hard titanium.
13. It is recommended to use a diamond carving knife for the acrylic mirror carving of the stone carving machine.
14. It is recommended to use multi-stripe milling cutters for rough processing of particle boards on stone engraving machines.
Send your message to us:
Post time: Sep-01-2020