1. Injin zanen talla:

abu mai zanen abu abu ne mai ɗan taushi, don haka ƙarfin dunƙulen mashin ɗin talla zai iya kasancewa tsakanin 1.5kw-3.0kw. Idan kun zaɓi wannan hanyar, zaku iya cimma manufar zane-zane da kuma adana tsada.

2. Injin aikin katako:

Za'a iya zaba motar ta sandar sandar katako gwargwadon ƙarfin itacen da za'a sarrafa shi. Arfin sa gabaɗaya yana kusa da 2.2kw-4.5kw. Wannan haɗin shine kuma mafi dacewa.

3. Injin zanen dutse:

Yakamata a zana karfin sandar injin zanen dutse wanda mai sana'anta yayi amfani dashi gwargwadon ƙarfin dutsen da za'a sarrafa shi, wanda yake da ɗan girma, gabaɗaya kusan 4.5kw-7.5kw, kuma motar sandar da aka fi amfani da ita ita ce 5.5kw

4. Jade sassaƙa inji:

Ofarfin babban motar shaft na injin sassaka jaka gabaɗaya 2.2kw-3.0kw ne saboda ƙaramin gadonta.

Gabaɗaya: kayan aiki masu ƙarfi, sarrafa girma mai girma, amfani da ƙarfi mai ƙarfi; kayan laushi, ƙaramin sarrafa girma, amfani da ƙananan ƙarfi. Tabbas, gabaɗaya magana, yana da kyau a sami ƙarfi mafi girma bayan biyan buƙatun. Ainihin amfani da wuta na motar yana da alaƙa da lodin, don haka don sandar da ake ƙera zane-zanen, a ƙarƙashin nauyi ɗaya, ainihin ƙarfin ƙarfin babbar sandar ba ta da bambanci sosai. Koyaya, saboda girman nauyin rotor da girman ɗaukar kaya, babban ƙarfin babban ƙarfin zai zama ƙasa da na ƙarami. Sabili da haka, kafin zaɓin spindle, ya zama dole a bayyana iyakar saurin da ake buƙata don kayan sarrafawa.

Saurin katako:

Kasa 15mm, gaba daya 1.5kw

Kullum zaɓi 2.2kw don fiye da 20mm

Zaɓi 3.0kw don allo ɗaya akan 30mm

Emily Qin 

whatsapp / wechat: 008615966055683

E-mail: emily@chinatopcnc.com